Sunny MCU and Electronics: พฤษภาคม 2020

วันจันทร์ที่ 4 พฤษภาคม พ.ศ. 2563

HUMAX HR2214A

อุปกรณ์นี้เป็นเราเตอร์ไวไฟของ TRUE Online มี WAN แบบ RJ45

ตัวเครื่อง

ตัวเครื่อง มีเสาอาศ 4 เสา

หลังเครื่อง

หลังเครื่อง มี 1 WAN RJ45 และ 4 LAN RJ45 มีพอร์ต USB 2.0 ให้ 1 พอร์ต

ภายในเครื่อง

แกะออกมาจะเจอ PCB ด้านล่างเป็นอย่างแรก

PCB ด้านบน

พลิก PCB อีกด้านจะเจอชิพหลายๆ ตัวดังนี้

RTL8197DN

Realtek RTL8197DN -> SoC with RLX5281 CPU, USB

NT5TU64M16HG-AC

NANYA NT5TU64M16HG-AC -> 1Gb DDR2 RAM

25Q64CSIG

GigaDevice 25Q64CSIG -> 64M-bit SPI NOR Flash

RTL8367RB

Realtek RTL8367RB -> LAYER 2 MANAGED 5+2-PORT 10/100/1000M SWITCH CONTROLLER

RTL8192ER

Realtek RTL8192ER -> 2T2R 802.11bgn 2.4G single-chip that integrates Wireless LAN (WLAN) and a network PCIe controller.

RTL8812AR

Realtek RTL8812AR -> 2T2R 802.11ac solutions with Wireless LAN (WLAN) PCI Express network interface controller.

SKY21 85712

SKYWORKS SKY85712-21 -> 5 GHz WLAN Front-End Module

หน้า Login

ตัวอย่างหน้า Web Login ของเราเตอร์

Bootlog

Booting...

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

@

@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize

@ 0000000h 0c84017h 00000c8h 0000040h 0000017h 0000000h 0000017h 0800000h

@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName

@ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 000002dh GD25Q64

@

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

---RealTek(RTL8196D)at 2016.07.08-20:11+0800 v1.2_c1 [16bit](659MHz)

Jump to image start=0x80500000...

decompressing kernel:

Uncompressing Linux... done, booting the kernel.

done decompressing kernel.

start address: 0x80003430

Realtek WLAN driver - version 1.6 (2013-02-21)(SVN:1963)

DFS function - version 1.0.23

Adaptivity function - version 7.1

#######################################################

SKB_BUF_SIZE=3600 MAX_SKB_NUM=768

#######################################################

#######################################################

SKB_BUF_SIZE=3600 MAX_SKB_NUM=768

#######################################################

Probing RTL8186 10/100 NIC-kenel stack size order[3]...

chip name: 8196C, chip revid: 0

NOT YET

eth0 added. vid=9 Member port 0x2...

eth1 added. vid=8 Member port 0x1...

eth2 added. vid=9 Member port 0x4...

eth3 added. vid=9 Member port 0x8...

eth4 added. vid=9 Member port 0x10...

eth5 added. vid=9 Member port 0x0...

[peth0] added, mapping to [eth1]...

Realtek FastPath:v1.03

init started: BusyBox v1.13.4 (2016-08-08 18:18:07 CST)

Init Start...

DEFAULT LANGUAGE_TYPE is [3][0:cn;1:en;2:tw;3:thai;4...]

Init bridge interface...

************* Initialize MAC/PHY parameter *************

[MAC_REG_8812_n]

[PHY_REG_8812_n_hp]

[PHY_REG_PG_8812_new]

[AGC_TAB_8812_n_hp]

[RadioA_8812_n_hp]

[RadioB_8812_n_hp]

[REG_TXPWR_TRK_8812_hp]

************* Initialize MAC/PHY parameter *************

Init Wlan application...

WiFi Simple Config v2.18-wps2.0 (2016.08.08-10:22+0000).

Register to wlan0

Register to wlan1

route: SIOCDELRT: No such process

iwcontrol RegisterPID to (wlan0)

iwcontrol RegisterPID to (wlan1)

IEEE 802.11f (IAPP) using interface br0 (v1.8)

Init WAN Interface...

MiniIGD v1.09.1 (2016.08.08-10:22+0000).

Start NTP daemon

[Debug]Init system in cste...

ROOTFS_OFFSET_T=2b5002 SysCurVerMd5=6680ce24114ed0a4b8bd5a49205e133e

2016-08-08 18:28:19: (log.c.97) server sta

carystudio login:

user = root

password = cs2012

Command - brctl

bridge name bridge id STP enabled interfaces
br0 8000.a0722c4c5328 no eth0
wlan0
wlan1

Command - ifconfig

br0 Link encap:Ethernet HWaddr A0:72:2C:4C:53:28
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:24451 errors:0 dropped:0 overruns:0 frame:0
TX packets:9980 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2421974 (2.3 MiB) TX bytes:3194222 (3.0 MiB)

eth0 Link encap:Ethernet HWaddr A0:72:2C:4C:53:28
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29850 errors:0 dropped:0 overruns:0 frame:0
TX packets:11930 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2888475 (2.7 MiB) TX bytes:3408311 (3.2 MiB)
Interrupt:12

eth1 Link encap:Ethernet HWaddr A0:72:2C:4C:53:29
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:12

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:7149 errors:0 dropped:0 overruns:0 frame:0
TX packets:7149 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:545866 (533.0 KiB) TX bytes:545866 (533.0 KiB)

wlan0 Link encap:Ethernet HWaddr A0:72:2C:4C:53:28
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3351231 errors:0 dropped:0 overruns:0 frame:0
TX packets:10591 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1014635400 (967.6 MiB) TX bytes:5712861 (5.4 MiB)
Interrupt:14

wlan1 Link encap:Ethernet HWaddr A0:72:2C:4C:53:2C
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1692720 errors:0 dropped:0 overruns:0 frame:0
TX packets:37517 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:382037343 (364.3 MiB) TX bytes:16756761 (15.9 MiB)
Interrupt:11

Command - mount

rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
ramfs on /var type ramfs (rw,relatime)
/dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
/dev/sda1 on /var/tmp/usb/sda1 type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp950,iocharset=utf8)

Command - top

Mem: 55352K used, 56472K free, 0K shrd, 14052K buff, 19020K cached
CPU: 0% usr 0% sys 0% nic 100% idle 0% io 0% irq 0% sirq
Load average: 1.29 0.98 0.97 1/32 30901
[7m PID PPID USER STAT VSZ %MEM %CPU COMMAND [0m
1400 1 root S 2788 2% 0% lighttpd -f /lighttp/lighttpd.conf -m
1379 1 root S 2680 2% 0% cste_sub -h 127.0.0.1 -t totolink/rou
9916 1 root S 1684 2% 0% minidlna -R -f /etc/minidlna.conf
1244 1 root S 1264 1% 0% dnsmasq
1316 1 root S 1096 1% 0% timelycheck
1357 1 root S 1044 1% 0% cs_broker -c /etc/mosquitto.conf
26057 1 root S 1028 1% 0% -sh
1 0 root S 1020 1% 0% init
30901 26057 root R 1020 1% 0% top
1330 1 root S 976 1% 0% ntp_inet -x th.pool.ntp.org
994 1 root S 968 1% 0% wscd -start -c /var/wsc-wlan0-wlan1.c
1249 1 root S 716 1% 0% lld2d br0
1235 1 root S 676 1% 0% miniigd -e 1 -i br0
964 1 root S 640 1% 0% udhcpd /var/udhcpd.conf
1228 1 root S 620 1% 0% udhcpc -i eth1 -p /etc/udhcpc/udhcpc-
997 1 root S 616 1% 0% iwcontrol wlan0 wlan1
1255 1 root S 600 1% 0% reload -k /var/wlsch.conf
983 1 root S 596 1% 0% iapp br0 wlan0 wlan1
1312 1 root S 124 0% 0% fwd
717 2 root SW< 0 0% 0% [mtdblockd]

vlan information

# ls /proc/net/vlan/
config hwNatLanVlanId vlanEnable wanVlanId
groupIndex pvid vlanGroup
# cd /proc/net/vlan/
# ls
config hwNatLanVlanId vlanEnable wanVlanId
groupIndex pvid vlanGroup
# cat config
VLAN Dev name | VLAN ID
Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD
# cat hwNatLanVlanId
rtk_hw_nat_lan_vid = 9
# cat vlan
cat: can't open 'vlan': No such file or directory
# cat vlanEnable
vlan enable:0 hw support enable:0
# cat wanVlanId
rtk_wan_vid (NAT) = 8
# cat groupIndex
0
# cat pvid
e0~e8:8,9,9,9,9,9,9,9,9 w0:0,w0-va0~va3:0,0,0,0,w0-vxd:0 w1:0,w1-va0~va3:0,0,0,0,w1-vxd:0

8367r asic pvid:
port 0 pvid 8 pri 0
port 1 pvid 9 pri 0
port 2 pvid 9 pri 0
port 3 pvid 9 pri 0
port 4 pvid 9 pri 0
port 5 pvid 1 pri 0
port 6 pvid 1 pri 0
port 7 pvid 1 pri 0

/proc/cmdline

console=ttyS0,38400 root=/dev/mtdblock1

/proc/cpuinfo

system type : RTL819xD
processor : 0
cpu model : 56322
BogoMIPS : 658.63
hardware watchpoint : no
tlb_entries : 32
mips16 implemented : yes

/proc/meminfo

MemTotal: 111824 kB
MemFree: 56184 kB
Buffers: 14052 kB
Cached: 18988 kB
SwapCached: 0 kB
Active: 11852 kB
Inactive: 24088 kB
Active(anon): 2900 kB
Inactive(anon): 0 kB
Active(file): 8952 kB
Inactive(file): 24088 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 4 kB
Writeback: 0 kB
AnonPages: 2908 kB
Mapped: 3104 kB
Slab: 18596 kB
SReclaimable: 6084 kB
SUnreclaim: 12512 kB
PageTables: 252 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 55912 kB
Committed_AS: 5180 kB
VmallocTotal: 1048404 kB
VmallocUsed: 580 kB
VmallocChunk: 1047812 kB

/proc/mtd

dev: size erasesize name
mtd0: 00200000 00001000 "boot+cfg+linux"
mtd1: 005b0000 00001000 "root fs"
mtd2: 00010000 00001000 "dualcfg"
mtd3: 00040000 00001000 "userdata"

/proc/version

Linux version 2.6.30.9 (wubingdong@localhost.localdomain) (gcc version 4.4.5-1.5.5p4 (GCC) ) #11 Mon Aug 8 18:28:05 CST 2016

ไฟล์ mtdblock และ firmware

download

วันอาทิตย์ที่ 3 พฤษภาคม พ.ศ. 2563

SERCOM T3 ST-244F

อุปกรณ์ตัวนี้เป็น ONU ของเน็ต TRUE ครับ

ตัวเครื่อง

ตัวเครื่องมีเสาถึง 6 เสา

ตัวเครื่อง

รองรับการต่อโทรศัพท์ 2 เครื่อง พอร์ต LAN 4 พอร์ต USB 2.0 x1, USB 3.0 x1, ช่องต่อกล่อง Cable TV

Label

Label ใต้เครื่อง

ภายในเครื่อง

ภายในเครื่องเมื่อดูที่สายของเสาอากาศจะพบว่า 2 เสาเป็นของ 2.4 GHz และอีก 4 เสาของ 5 GHz

PCB

ใน PCB มีอุปกรณ์ต่างๆ คือ

RTL9607C

Realtek RTL9607C -> 4 Core MIPS CPU (built-in 256MB DDR）

Le9642PQC

Microsemi Le9642PQC -> Dual Subscriber Line Interface Circuit miSLIC

P61089L

D.G.M.E. P61089L -> SLIC Protector

RTL8814BR

Realtek RTL8814BR -> 4x4 MIMO 256-QAM, maximum rate 1733Mbps, 5GHz

SKY746

SKYWORKS SKY85746-11 -> 5 GHz 802.11ax Ultra-Linear WLAN Front-End

Module with Integrated Log Detector

RTL8192ER

Realtek RTL8192ER -> 2x2 2.4G single-chip that integrates Wireless LAN (WLAN)

PCB อีกด้าน

อีกด้านมีไอซี 1 ตัว

F50L1G41LB

ESMT F50L1G41LB -> 3.3V 1 Gbit SPI-NAND Flash Memory

Boot Log

RTL9607C/RTL9603C

PRELOADER Bismarck3.5

II: LPLR:1126, SVN:22b2003c, Build_date:19041615, Toolkit:msdk-4.8.5-1004k-EB-3.18-u0.9.33-m32t-150818

II: Disable OCP/LX Timeout Monitor

II: SNAF version check OK!

II: TLB initial done:

.ro section works!

.text and .ro sections work!

II: CPU0 900MHz, CPU1 500MHz, DRAM 600MHz, LX 200MHz, SRAM 500MHz, SPIF 100MHz

AK: ******* DRAM calibration version: v4.1 *******

MEMPLL:[31/63/95/127/159/191/223]=407f, c0000210, 2ea23980, 2d0f0030, fff, 0, 0

AK: TP=3, VD=1, CC=3, OT=3, EP=0

AK: Start DDR3 Reset Procedure

ZQ: Clock: ODT/OCD=30/48, zq_zctrl_prog=0x c080c3e, zq_zctrl_status=0x219344

ZQ: Address: ODT/OCD=30/80, zq_zctrl_prog=0x1c080c32, zq_zctrl_status=0x219311

ZQ: DQ: ODT/OCD=30/60, zq_zctrl_prog=0x2c080c38, zq_zctrl_status=0x219322

ZQ: DQS: ODT/OCD=30/60, zq_zctrl_prog=0x3c080c38, zq_zctrl_status=0x219322

ZQ: INTERAL DDR3, ZQCL done, ZQCS Enable

AK: MRS: mr[0]=0x101a50, mr[1]=0x110004, mr[2]=0x120010, mr[3]=0x130000

AK: Bit/max_r_s/max_r_l/max_w_s/max_w_l Bit/max_r_s/max_r_l/max_w_s/max_w_l

[ 0] 0 1f 0 1d [16] 2 1d 0 1d

[ 1] 2 1d 0 1d [17] 2 1d 0 1d

[ 2] 0 1f 0 1d [18] 0 1f 0 1d

[ 3] 0 1f 0 1b [19] 0 1f 0 1b

[ 4] 0 1f 0 1d [20] 2 1d 0 1d

[ 5] 0 1f 0 1d [21] 0 1f 0 1d

[ 6] 0 1f 0 1d [22] 0 1f 0 1d

[ 7] 0 1f 0 1d [23] 0 1f 0 1d

[ 8] 0 1f 0 1b [24] 2 1d 0 1b

[ 9] 0 1f 0 1d [25] 0 1f 0 1d

[10] 0 1f 0 1d [26] 0 1f 0 1d

[11] 0 1f 0 1b [27] 0 1f 0 1b

[12] 0 1f 0 1b [28] 0 1f 0 1b

[13] 0 1f 0 1b [29] 0 1f 0 1b

[14] 2 1d 0 1d [30] 2 1d 0 1d

[15] 0 1f 0 1d [31] 0 1f 0 1d

AK: Let's calibrate DRAM again, it will be better!

AK: Group delay: DQS0=2, DQS1=2

AK: Bit/max_r_s/max_r_l/max_w_s/max_w_l Bit/max_r_s/max_r_l/max_w_s/max_w_l

[ 0] 0 1f 0 1d [16] 0 1f 0 1d

[ 1] 0 1f 0 1d [17] 0 1f 0 1d

[ 2] 0 1f 0 1d [18] 0 1f 0 1d

[ 3] 0 1f 0 1b [19] 0 1f 0 1b

[ 4] 0 1f 0 1d [20] 0 1f 0 1d

[ 5] 0 1f 0 1d [21] 0 1f 0 1d

[ 6] 0 1f 0 1d [22] 0 1f 0 1d

[ 7] 0 1f 0 1d [23] 0 1f 0 1d

[ 8] 0 1f 0 1b [24] 0 1f 0 1b

[ 9] 0 1f 0 1b [25] 0 1f 0 1d

[10] 0 1f 0 1d [26] 0 1f 0 1d

[11] 0 1f 0 1b [27] 0 1f 0 1b

[12] 0 1f 0 1b [28] 0 1f 0 1b

[13] 0 1f 0 1b [29] 0 1f 0 1b

[14] 0 1f 0 1d [30] 0 1f 0 1d

[15] 0 1f 0 1d [31] 0 1f 0 1d

AK: DRAM size=0x10000000, tRFC[2]=0x165(nS), tREF=1920(nS)

AK: DCR=0x21321003, DTR[0:2]=0x99644828, 0x808051f, 0x6516000

II: DDR3, 256MB

II: Change Stack from 0x9f002edc to 0x806fffe0

II: U-boot Magic Number is 0x27051956

II: Inflating U-Boot (0x80700040 -> 0x83c00000)... OK

II: Starting U-boot...

U-Boot 2011.12.NA (Apr 16 2019 - 15:45:32)

Board:RTL9607C, CPU:900MHz, LX:200MHz, MEM:600MHz, SPIF:100MHz, Type:DDR3

SPI-NAND Flash: C801/Mode0 1x128MB

Create bbt:

Loading 16384B env. variables from offset 0xc0000

Loading 16384B env. variables from offset 0xe0000

Loaded 16384B env. variables from offset 0xe0000

Net: LUNA GMAC

Warning: eth device name has a space!

Hit any key to stop autoboot: 0

swcore_init

multicast_start Using LUNA GMAC device

mcast upgrade timeout.

done

## Booting kernel from Legacy Image at 83000000 ...

Image Name: Linux Kernel Image

Created: 2019-09-06 8:55:08 UTC

Image Type: MIPS Linux Kernel Image (lzma compressed)

Data Size: 3365780 Bytes = 3.2 MB

Load Address: 80000000

Entry Point: 80000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Starting kernel ...

DEBUG_MEM_AUTO: DCR=0x21321003

DEBUG_MEM_AUTO: dcr=0x21321003, bankcnt=0x00000008, mem_size=0x10000000, banksize=0x02000000

DEBUG_MEM_AUTO: LUNA_PBO_DL_DRAM_SIZE_BARRIER=0x00401000, LUNA_PBO_UL_DRAM_SIZE_BARRIER=0x00401000

DEBUG_MEM_AUTO: LUNA_PBO_UL_DRAM_OFFSET=0x0f3ff000,LUNA_PBO_DL_DRAM_OFFSET=0x0dbff000

DEBUG_MEM_AUTO: PAGE_SIZE=0x00001000

DEBUG_MEM_AUTO: BSP_DSP_MEM_BASE=0xf900000, BSP_IPC_MEM_BASE=0xf800000

DEBUG_MEM_AUTO: [bsp_prom_memmap]add_memory_region(0, 230682624, BOOT_MEM_RAM)

DEBUG_MEM_AUTO: [bsp_prom_memmap]add_memory_region(0x00000000, 0x0dbff000, BOOT_MEM_RAM)

DEBUG_MEM_AUTO: [bsp_prom_memmap]add_memory_region(234881024, 20967424, BOOT_MEM_RAM)

DEBUG_MEM_AUTO: [bsp_prom_memmap]add_memory_region(0x0e000000, 0x013ff000, BOOT_MEM_RAM)

Linux version 3.18.24 (root@runner-6b51163f-project-11-concurrent-0) (gcc version 4.8.5 20150209 (prerelease) (Realtek MSDK-4.8.5p1 Build 2536) ) #1 SMP Tue Sep 3 10:19:34 UTC 2019 [luna SDK V3.3.0]

MIPS: machine is RTL9607C/RTL9603C

[L2_DEBUG:(bsp_scache_config,553)]L2_CONFIG= 0x0

[L2_DEBUG:(bsp_scache_config,557)] - L2_DataStall= 0x0

[L2_DEBUG:(bsp_scache_config,558)] - L2_TagStall = 0x0

[L2_DEBUG:(bsp_scache_config,559)] - L2_WsStall = 0x0

[L2_DEBUG:(bsp_scache_config,560)] - L2_Bypass: Disable

[L2_DEBUG:(bsp_setup_scache,590)]SCache LineSize= 32 (B)

CPU clock is 900

Disable SRAM PLL...done

CPU0 revision is: 0001a120 (MIPS interAptiv (multi))

Determined physical RAM map:

memory: 0dbff000 @ 00000000 (usable)

memory: 013ff000 @ 0e000000 (usable)

Zone ranges:

Normal [mem 0x00000000-0x0f3fefff]

HighMem empty

Movable zone start for each node

Early memory node ranges

node 0: [mem 0x00000000-0x0dbfefff]

node 0: [mem 0x0e000000-0x0f3fefff]

Initmem setup node 0 [mem 0x00000000-0x0f3fefff]

VPE topology {2,2} total 4

Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

PERCPU: Embedded 9 pages/cpu @89e16000 s5760 r8192 d22912 u36864

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60950

Kernel command line: console=ttyS0,115200 mtdparts=spinand:768K(boot),128K(env),128K(env2),10752K(config),5M(k0)ro,20M(r0)ro,5M(k1),20M(r1),64M(app),4K@0ro,4K@0ro,4K@0ro,5M@11776K(linux),20M@16896K(rootfs) root=31:5

root_dev_setup line 301 root: 31:5

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Writing ErrCtl register=00000000

Readback ErrCtl register=00000000

Memory: 83512K/245752K available (25439K kernel code, 1547K rwdata, 2244K rodata, 184K init, 130368K bss, 162240K reserved, 0K highmem)

Hierarchical RCU implementation.

NR_IRQS:128

gic_init: GIC_BASE_ADDR=0x1fbc0000, GIC_ADDRSPACE_SZ=0x00020000

Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

CPU1 revision is: 0001a120 (MIPS interAptiv (multi))

Synchronize counters for CPU 1: done.

Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

CPU2 revision is: 0001a120 (MIPS interAptiv (multi))

Synchronize counters for CPU 2: done.

Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

CPU3 revision is: 0001a120 (MIPS interAptiv (multi))

Synchronize counters for CPU 3: done.

Brought up 4 CPUs

devtmpfs: initialized

NET: Registered protocol family 16

SCSI subsystem initialized

usb_enable_IP(781)

set_usbphy(785)

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Switched to clocksource MIPS

NET: Registered protocol family 2

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP: reno registered

UDP hash table entries: 256 (order: 1, 8192 bytes)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

NET: Registered protocol family 1

=================================

CONFIG_LUNA_SOC_GPIO: gpio_init()

=================================

XHCI v3.10

XHCI U2 Phy Init

u3_utmi_wait timeout

XHCI U3 Phy Init

[Kthread : luan_watchdog ] init complete!

************ Watchdog Setting ****************

WDT_E=0, (1-enable, 0-disable)

LX(MHz)=200

WDT_CLK_SC=3

PH1_TO=31

PH2_TO=0

WDT_RESET_MODE=0

**********************************************

==== Luna Watchdog Regs =====

BSP_WDTCNTRR(0xb8003260): 0x00000000

BSP_WDTINTRR(0xb8003264): 0x00000000

BSP_WDTCTRLR(0xb8003268): 0xe7c00000

=================================

catv init!

futex hash table entries: 1024 (order: 4, 65536 bytes)

squashfs: version 4.0 (2009/01/31) Phillip Lougher

fuse init (API version 7.23)

msgmni has been set to 163

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled

serial8250: ttyS0 at MMIO 0x18002000 (irq = 39, base_baud = 12327200) is a 16550A

console [ttyS0] enabled

aipcBoardChipId=0x96070001 aipcBoardChipRev=0x00000002 aipcBoardChipSubType=0x00000018

RTL9607C_CHIP_ID 0x96070001

CHIP_REV_ID_B 0x00000002

aipc: register chrdev(254,0)

aipc: create device successed

aipc: start aipc irq init

aipc: Request IRQ for IPC OK

aipc: create dsp console device successed

aipc: init done

Realtek Luna SPI NAND Flash Driver Rev:00:00:00 (ChaoYuan_Yang)

[SPINAND] Blocks number under 6 are protected

Use RTK bb func

Use RTK bb scan

nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01

nand: Unknown

nand: 128MiB, SLC, page size: 2048, OOB size: 64

good block number 1024

14 cmdlinepart partitions found on MTD device spinand

RTK: using dynamic nand partition

Creating 14 MTD partitions on "spinand":

0x000000000000-0x0000000c0000 : "boot"

0x0000000c0000-0x0000000e0000 : "env"

0x0000000e0000-0x000000100000 : "env2"

0x000000100000-0x000000b80000 : "config"

0x000000b80000-0x000001080000 : "k0"

0x000001080000-0x000002480000 : "r0"

0x000002480000-0x000002980000 : "k1"

0x000002980000-0x000003d80000 : "r1"

0x000003d80000-0x000007d80000 : "app"

0x000000000000-0x000000001000 : "Partition_009"

0x000000000000-0x000000001000 : "Partition_010"

0x000000000000-0x000000001000 : "Partition_011"

0x000000b80000-0x000001080000 : "linux"

0x000001080000-0x000002480000 : "rootfs"

Size of the first partition is 6 blocks.

Realtek SPINAND Flash Driver is successfully installing.

8686 Ethernet driver v0.0.1 (Aug 17, 2016)[Dual Band Disable]

GMAC0 Tx Ring Size:

[#0]:1024 [#1]:64 [#2]:64 [#3]:64 [#4]:64

GMAC0 Rx Ring Size:

[#0]:4096 [#1]:256 [#2]:256 [#3]:64 [#4]:64 [#5]:64

eth0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

RTL8686 GMAC Probing..

Disable gmac[0] padding

GMAC1 Tx Ring Size:

[#0]:1024 [#1]:64 [#2]:64 [#3]:64 [#4]:64

GMAC1 Rx Ring Size:

[#0]:1024 [#1]:256 [#2]:256 [#3]:64 [#4]:64 [#5]:64

eth1: RTL-8686 at 0xb8014000, 00:00:00:01:00:02, IRQ 54

RTL8686 GMAC Probing..

Disable gmac[1] padding

GMAC2 Tx Ring Size:

[#0]:256 [#1]:64 [#2]:64 [#3]:64 [#4]:64

GMAC2 Rx Ring Size:

[#0]:256 [#1]:256 [#2]:256 [#3]:64 [#4]:64 [#5]:64

eth2: RTL-8686 at 0xb8016000, 00:00:00:01:00:02, IRQ 56

RTL8686 GMAC Probing..

Disable gmac[2] padding

eth0.2: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

eth0.3: RTL-8686 at 0xb8014000, 00:00:00:01:00:02, IRQ 54

eth0.4: RTL-8686 at 0xb8016000, 00:00:00:01:00:02, IRQ 56

eth0.5: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

eth0.6: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

eth0.7: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

nas0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

>>>> Set nas0 carrier off !!!

pon0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 52

first entry: 0, portmask 2047, rx: 807675f4

eth0.2 -> 0x1

eth0.3 -> 0x2

eth0.4 -> 0x4

eth0.5 -> 0x8

eth0.6 -> 0x10

eth0.7 -> 0x100

Init RTK Driver Module....rtk_switch_irq_init 354 irq=31 name=apl_sw

OK

Init RTK Core Dev Module....OK

rtdrv_init !!! for netfilter

pkt_redirect_init complete

interrupt broadcaster init ok!

rg_system_proc_init CPUID: 3

priority: 0, portmask 2047, rx: 807675f4

insert here, priority: 1, portmask 2047, rx: 803d2c7c

PPP generic driver version 2.4.2

NET: Registered protocol family 24

PPTP driver version 0.8.5

Realtek WLAN driver driver version 4.0.3 (2018-01-31)

DFS function - version 2.0.14

Adaptivity function - version 9.7.07

CFG0

PCIE0 reset pin is set to GPIO 40

===> PCIE reset try 0

9607c pcie port 0

IC-B

Port0 Link@5.0Ghz

rtl8192cd_init_one(15097): vendor_deivce_id(b81410ec) sub(b81410ec)

found 8814B !!!

IS_RTL8814B_SERIES value8 = 11

MACHAL_version_init

11692M

HALMAC_MAJOR_VER = 1

HALMAC_PROTOTYPE_VER = 6

HALMAC_MINOR_VER = 2

HALMAC_PATCH_VER = 11

[TRACE]halmac_init_adapter <===

halmac_init_adapter Succss

[MACFM_software_init 256]wifi hal support Mac function = 0x38168

#### root = 8e5f0000 ####

OFLD: cpu_addr ae3a8000, dma_handle 2e3a8000,txdma size 3842048

#######################################################

SKB_BUF_SIZE=9232 MAX_SKB_NUM=2048

#######################################################

[MACFM_software_init 256]wifi hal support Mac function = 0x38168

#### wlan0-vap0 (vap) = 8e728000 ####

[MACFM_software_init 256]wifi hal support Mac function = 0x38168

#### wlan0-vap1 (vap) = 8e740000 ####

[MACFM_software_init 256]wifi hal support Mac function = 0x38168

#### wlan0-vap2 (vap) = 8e770000 ####

[MACFM_software_init 256]wifi hal support Mac function = 0x38168

#### wlan0-vap3 (vap) = 8e788000 ####

CFG1

PCIE1 reset pin is set to GPIO 39

===> PCIE reset try 0

9607c pcie port 1

IC-B

Port1 Link@2.5GHz

rtl8192cd_init_one(15097): vendor_deivce_id(818c10ec) sub(818c10ec)

IS_RTL8192F_SERIES value8 = d

MACHAL_version_init

[MACFM_software_init 256]wifi hal support Mac function = 0x84960

#### root = 8e7b8000 ####

#######################################################

SKB_BUF_SIZE=4832 MAX_SKB_NUM=768

#######################################################

[MACFM_software_init 256]wifi hal support Mac function = 0x84960

#### wlan1-vap0 (vap) = 8e7e8000 ####

[MACFM_software_init 256]wifi hal support Mac function = 0x84960

#### wlan1-vap1 (vap) = 8d608000 ####

[MACFM_software_init 256]wifi hal support Mac function = 0x84960

#### wlan1-vap2 (vap) = 8d630000 ####

[MACFM_software_init 256]wifi hal support Mac function = 0x84960

#### wlan1-vap3 (vap) = 8d660000 ####

rtl86xx-xhci rtl86xx-xhci: xHCI Host Controller

rtl86xx-xhci rtl86xx-xhci: new USB bus registered, assigned bus number 1

rtl86xx-xhci rtl86xx-xhci: irq 68, io mem 0x18060000

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

rtl86xx-xhci rtl86xx-xhci: xHCI Host Controller

rtl86xx-xhci rtl86xx-xhci: new USB bus registered, assigned bus number 2

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

reigster rtl86xx

rtl86xx-ehci rtl86xx-ehci.0: Realtek rtl86xx On-Chip EHCI Host Controller

rtl86xx-ehci rtl86xx-ehci.0: new USB bus registered, assigned bus number 3

rtl86xx-ehci rtl86xx-ehci.0: irq 67, io mem 0x18021000

rtl86xx-ehci rtl86xx-ehci.0: USB 2.0 started, EHCI 1.00

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 1 port detected

register rtl86xx (0)

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

rtl86xx-ohci rtl86xx-ohci.0: Realtek rtl86xx On-Chip OHCI controller

rtl86xx-ohci rtl86xx-ohci.0: new USB bus registered, assigned bus number 4

rtl86xx-ohci rtl86xx-ohci.0: irq 67, io mem 0x18020000

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 1 port detected

usbcore: registered new interface driver uas

usbcore: registered new interface driver usb-storage

nf_conntrack version 0.5.0 (1304 buckets, 5216 max)

gre: GRE over IPv4 demultiplexor driver

ip_tables: (C) 2000-2006 Netfilter Core Team

/proc/DoS created

TCP: cubic registered

NET: Registered protocol family 10

ip6_tables: (C) 2000-2006 Netfilter Core Team

sit: IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.

Bridge firewalling registered

Ebtables v2.0 registered

l2tp_core: L2TP core driver, V2.0

l2tp_ppp: PPPoL2TP kernel driver, V2.0

8021q: 802.1Q VLAN Support v1.8

Realtek GPIO Driver for Flash Reload Default

VoIP control bind 2 (2) instances successfully.

index dsp_cpuid dsp_cch host_cch

----- --------- ------- --------

0 0 0 0

1 0 1 1

voip spin lock init done

VoIP RX netfilter hook init done!

VoIP RX netfilter hook for IPv6 init done!

=============RTK VOIP SUITE=============

SDK VoIP Version: VoIP-1.6-DSP-R5523-Luna-R23-rtp refine

Board CFG Model :

INITIAL VOIP MANAGER PROGRAM

VFS: Mounted root (squashfs filesystem) readonly on device 31:5.

Freeing unused kernel memory: 184K (81c92000 - 81cc0000)

random: init urandom read with 54 bits of entropy available

starting pid 60, tty '': '/etc/init.d/rcS'

=== Start to run rc0 / rc63 ===

----- do_rc [/etc/init.d/rc2] -----

Mounting /dev/mtdblock3 onto /var/config as the configuration data storage

yaffs: dev is 32505859 name is "mtdblock3" rw

yaffs: passed flags "tags-ecc-off"

Mounting /dev/mtdblock8 onto /var/misc as the configuration datayaffs: dev is 32505864 name is "mtdblock8" rw

storage

yaffs: passed flags "tags-ecc-off"

Mounting /dev/mtdblock onto /var/mnt/true as the configuration data storage

ls: /dev/mtdblock: No such file or directory

Warning: cannot find the corresponding MTD to mount.

cp: can't create '/var/mnt/true/agent': No such file or directory

/etc/init.d/rc2: line 21: /var/mnt/true/agent: not found

----- do_rc [/etc/init.d/rc3] -----

no need to do reset to default

aipc: (0358)prepare_BIR

aipc: write image successful. size=2881648 rc=2881648 wc=2881648 da=0xb02c0400 raipc: (0481)aipc_dev_ioctl boot dsp

emain=0

aipc: (0483)aipc_dev_ioctl boot dsp done

set_msgqueue_max_size:231> set msgqidds.msg_qbytes=35960 OK

setaipc: (0492)aipc_dsp_disable_mem

_msgqueue_max_size:231> set msgqidds.msg_qbytes=35960 OK

Wait DSP 0/1 booting ......

Wait DSP ok. wait_cnt=0

DSP 0 Software Ready!

tv_sec:5 tv_usec:734881

CPU0 kick watchdog!

------ [-b]Bootup_config ------

Fetch mib data (type 8) from program code.

Fetch mib data (type 2) from program code.

Pre-fetch mib data from program default done.

Checking input file [/var/config/lastgood_hs.xml].

[OK] Valid config file!

random: nonblocking pool is initialized

***** config_parser(): dfname=[/etc/config_default_hs.xml](0) loaded *****

***** config_parser(): fname=[/var/config/lastgood_hs.xml](0) loaded *****

[xml_INFO]: Load HS configuration success.

Checking input file [/var/config/lastgood.xml].

[OK] Valid config file!

***** config_parser(): dfname=[/etc/config_default.xml](0) loaded *****

***** config_parser(): fname=[/var/config/lastgood.xml](0) loaded *****

[xml_INFO]: Load CS configuration success.

********************begin cfg upgrade**********************

********************end cfg upgrade**********************

xml_mib_update():...

xml_mib_update():...

------ [-u hs]Update hs setting ------

init mac based tag des

Turn on.

===============================CAUTION===============================

This functionality should configure BEFORE romeDriver initialization.

Otherwise may cause unpredictable problem.

Init RG with GPON mode.

Disable gmac[0] padding

Disable gmac[1] padding

------ [-u cs]UpDisable gmac[2] padding

date cs setting ------

=============Init_rg_api SUCESS!!==================

10000 12000

sync port range to /proc/sys/net/ipv4/ip_local_port_range, too

igmp report ingress filter portmask: 0xffdf

Dose not distribute Protocol stack transmission to different CPU.

[xml_INFO]: Update hs configuration success.

[SW ACL idx 11/12] Assigned IGMP/MLD priority to 7.

Assigned TCP SYN share meter to 31.

meter[31](rate=3000, ifgInclude=1) !

1

meter[30](rate=56, ifgInclude=1) !

Drop.

Disable

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[0]

from CPU[1] offload WIFI 11AC TX to CPU[0]

from CPU[2] offload WIFI 11AC TX to CPU[0]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

[xml_INFO]: Update cs configuration success.

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[0]

from CPU[1] offload WIFI 11AC TX to CPU[0]

from CPU[2] offload WIFI 11AC TX to CPU[0]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[0]

from CPU[1] offload WIFI 11AC TX to CPU[0]

from CPU[2] offload WIFI 11AC TX to CPU[0]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[0]

from CPU[1] offload WIFI 11AC TX to CPU[0]

from CPU[2] offload WIFI 11AC TX to CPU[0]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[3]

from CPU[1] offload WIFI 11AC TX to CPU[0]

from CPU[2] offload WIFI 11AC TX to CPU[0]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[3]

from CPU[1] offload WIFI 11AC TX to CPU[3]

from CPU[2] offload WIFI 11AC TX to CPU[0]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[3]

from CPU[1] offload WIFI 11AC TX to CPU[3]

from CPU[2] offload WIFI 11AC TX to CPU[3]

from CPU[3] offload WIFI 11AC TX to CPU[0]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

from CPU[0] offload RG RX to CPU[2]

from CPU[1] offload RG RX to CPU[2]

from CPU[2] offload RG RX to CPU[2]

from CPU[3] offload RG RX to CPU[2]

from CPU[0] offload NIC TX to CPU[0]

from CPU[1] offload NIC TX to CPU[0]

from CPU[2] offload NIC TX to CPU[0]

from CPU[3] offload NIC TX to CPU[0]

from CPU[0] offload WIFI 11AC TX to CPU[3]

from CPU[1] offload WIFI 11AC TX to CPU[3]

from CPU[2] offload WIFI 11AC TX to CPU[3]

from CPU[3] offload WIFI 11AC TX to CPU[3]

from CPU[0] offload WIFI 11N TX to CPU[3]

from CPU[1] offload WIFI 11N TX to CPU[3]

from CPU[2] offload WIFI 11N TX to CPU[3]

from CPU[3] offload WIFI 11N TX to CPU[3]

from CPU[0] offload NIC TX to GMAC[9]

from CPU[1] offload NIC TX to GMAC[9]

from CPU[2] offload NIC TX to GMAC[9]

from CPU[3] offload NIC TX to GMAC[9]

@platform_db_init(9461) macBasedTagDecision=[1], ivlMacast=[0], fwdVLAN_CPU=[4096], fwdVLAN_CPU_SVLAN=[4097]

omci platform attached!

register_gpon_evt_state: register gpon event state Successfully !

Loading TR-142 Module...

Realtek TR-142 Module initialized. err = 0, max_ponq_id=128

running GPON mode ...

insmod: can't insert '/lib/modules/rldp_drv.ko': No such file or directory

[rtkbosa Tool]

SAFE_MODE_STARTUP: 0x00

INIT_STATE (Table 3, 0xF0): 0x00

UX3320 is Working, do NOT do initialization!!!

----- do_rc [/etc/init.d/rc6] -----

----- do_rc [/etc/init.d/rc10] -----

----- do_rc [/etc/init.d/rc14] -----

----- do_rc [/etc/init.d/rc18] -----

----- do_rc [/etc/init.d/rc32] -----

----- do_rc [/etc/init.d/rc34] -----

write watchdog_flag to 0x00000001

REG32(BSP_WDTCTRLR) = 0xe7c00000

----- do_rc [/etc/init.d/rc35] -----

run rcm voip script...

Inactive PIN_CS:

aipc: (0174)aipc_module_voip_set_pcm_fs IO_MODE_EN=0x00092058

MIB chain descriptors checking (total 40) ok !

Turn on phy power...

<utility.c 1382 setup_mac_addr> macAddr[5]+3 = 53

move this action after init

CMD: /bin/ifconfig eth0.2 hw recv skb from user space pid:420

ether 70f82bcddewifi_netlink_pid=420

50

wifiRxDistributeNotifierInit create NETLINK socket!

wifiRxDistributeNotifierInit set pid 420

CMD: /bin/ifconfig eth0.3 hw ether 70f82bcdde50

starting pid 475, tty '/dev/ttyS0': '/bin/login -p'

CMD: /bin/ifconfig eth0.4 hw ether 70f82bcdde50

devicePcn = [75], deviceRcn = [8]]

FXS in LOW power modeFXS in LOW power mode CMD: /bin/ifconfig eth0.5 hw ether 70f82bcdde50

starting pid 490, tty '': '/bin/inetd'

CMD: /bin/ifconfig wlan0 hw ether 70f82bcdde50

<utility.c 1382 setup_mac_addr> macAddr[5]+1 = 51

CMD: /bin/ifconfig wlan0-vap0 hw ether 70f82bcdde51

login: <utility.c 1382 setup_mac_addr> macAddr[5]+1 = 52

CMD: /bin/ifconfig wlan0-vap1 hw ether 70f82bcdde52

<utility.c 1382 setup_mac_addr> macAddr[5]+1 = 53

CMD: /bin/ifconfig wlan0-vap2 hw ether 70f82bcdde53

<utility.c 1382 setup_mac_addr> macAddr[5]+1 = 54

CMD: /bin/ifconfig wlan1 hw ether 70f82bcdde54

<utility.c 1382 setup_mac_addr> macAddr[5]+1 = 55

CMD: /bin/ifconfig wlan1-vap0 hw ether 70f82bcdde55

<utility.c 1382 setup_mac_addr> macAddr[5]+1 = 56

CMD: /bin/ifconfig wlan1-vap1 hw ether 70f82bcdde56

<utility.c 1382 setup_mac_addr> macAddr[5]+1 = 57

CMD: /bin/ifconfig wlan1-vap2 hw ether 70f82bcdde57

CMD: /bin/brctl addbr br0

CMD: /bin/ifconfig br0 hw ether 70f82bcdde50

CMD: /bin/ifconfig eth0 hw

device eth0.2 entered promiscuous mode

ether 70f82bcdde50

CMD: /bin/brctl stp br0 off

CMD: /bin/brctl setfd br0 1

CMD: /bin/brctl setageport 3 ing br0 7200

assign to eth0.2

CMD: /bin/brcteth0.2 -> 0x8

l addif br0 eth0.2

system(): /bin/echo 3 eth0.2 > /proc/rtl8686gmac/dev_port_mapping

system(): echo eth0.2 3 >> /var/dev_port_mapping

CMD: /bin/brctl addif br0 ethdevice eth0.3 entered promiscuous mode

0.3

system(): /bin/echo 2 eth0.3 > /proc/rtl8686gmac/dev_port_mapping

port 2 assign to eth0.3

eth0.3 -> 0x4

system(): echo eth0.3 2 >> /var/dev_port_mapping

CMD: /bin/brctl addif br0 ethdevice eth0.4 entered promiscuous mode

0.4

system(): /bin/echo 1 eth0.4 > /proc/rtl8686gmac/dev_port_mapping

port 1 assign to eth0.4

eth0.4 -> 0x2

system(): echo eth0.4 1 >> /var/dev_port_mapping

CMD: /bin/brctl addif br0 ethdevice eth0.5 entered promiscuous mode

0.5

system(): /bin/echo 0 eth0.5 > /proc/rtl8686gmac/dev_port_mapping

port 0 assign to eth0.5

eth0.5 -> 0x1

system(): echo eth0.5 0 >> /var/dev_port_mapping

CMD: /bin/brctl addif br0 eth0

device eth0 entered promiscuous mode

IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready

CMD: /bin/ifconfig br0 192.168.1.1 netmask 25IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready

5.255.255.0 mtu 1500

Find ATM_VC_TBL interface br0 Fail!

CMD: /bin/ifconfig br0 add fe80::1/64

CMD: /bin/ifconfig eth0 up

re8670_open 3975

br0: port 5(eth0) entered forwarding state

br0: port 5(eth0) entered forwarding state

IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready

CMD: /bin/spppd

CMD: /bin/vsntp -s time.windows.com -i 86400

CMD: /bin/boa

drivers/net/ethernet/realtek/rtl86900/sdk/src/rtk/pon_led.c:1180 led sw blink init complete!

rtk_pon_led_SpecType_set 0

RG_reset_static_route-1627 DONE !

xml_mib_update():...

CMD: /bin/ifconfig nas0 hw ether 70f82bcdde50

CMD: /bin/ifconfig nas0 up

IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready

TRACE: /bin/ethctl addsmux pppoe nas0 nas0_0 napt vlan 8292

netIfIdx 1 vid 100 pri 0 type 3 service 1 isBinding 0 bAdd 1

pf_rtl96xx_UpdateVeipRule: Failed to modify the veip rule for wanif[1]

CMD: /bin/ifconfig nas0_0 down

CMD: /bin/ifconfig nas0_0 hw ether 70f82bcdde53

system(): /bin/echo 5 nas0 > /proc/rtl8686gmac/dev_port_mapping

------ [-u cs]Update cs setting ------

port 5 assign to nas0

nas0 -> 0x20

<fMgmtInit:601> is the so is not a regular file.

<fMgmtInit:601> is the so is not a regular file.

<fMgmtInit:601> is the so is not a regular file.

voip flash server share size = 27387

rcm_voip_get_ctype_interface

Module libigmpipc.so is loaded and inited

++++++The size of voipConfig 26687

Module libomcivoip.so is loaded and inited

rtk_tr142.so is loaded

Module libtr142.so is loaded and inited

load moduleOptInitFunc

Module /lib/features/internal/bdp_00000080.so is inited

Module /lib/features/internal/bdp_00000200.so is inited

Module /lib/features/internal/me_00000400.so is inited

=====>>>>set boa_pid=651

load moduleOptInitFunc

Module /lib/features/internal/me_00020000.so is inited

Module /lib/features/internal/me_00040000.so is inited

load moduleOptInitFunc

Module /lib/features/internal/me_00080000.so is inited

stat failed: /lib/features/internal/me_00100000.so

####################### voice_rtk_init_voip_cfg() #######################

voip omci line state share size = 744

### voice_rtk_init_voip_cfg()###, pFlash=0x76ea1fe0, g_pLineState=0x77196000

br0: port 5(eth0) entered forwarding state

Open file /var/tmp/hosts failed !

VpSetOption for line IO failed. status = 6

omci_wrapper_msgHandler: devMode 1,receiveState 1,usrLogLvl 1, drvLogLvl 1,sn SCOM6c▒

[xml_INFO]: Update cs configuration success.

CMD: /bin/ifconfig nas0_0 txqueuelen 10

IPv6: ADDRCONF(NETDEV_UP): nas0_0: link is not ready

IPv6: ADDRCONF(NETDEV_UP): nas0_0: link is not ready

[startConnection@6719] pEntry->ifIndex = 65536, pEntry->cmode = 2

PPPoE

IPv6: ADDRCONF(NETDEV_UP): ppp0: link is not ready

CMD: /bin/ifconfig ppp0 txqueuelen 0

CMD: /bin/tc qdisc replace dev ppp0 root pfifo

VpSetOption for line IO failed. status = 6

All DSP Software Ready. VoIP Defer Init done.

start watch dog

Ont3gDrvCfg, 51, attrSet=0x0

FactResetDrvCfg, 48, attrSet=0x0

DsFactResetDrvCfg, 48, attrSet=0x0

CMD: /bin/tc qdisc del dev ppp0 root

CMD: spppctl add 0 pppoe nas0_0 username 9600305617@fiberhome password password gw 1 mru 1492 debug 0 ipt 2

[raise_spppd][1880]continue spppd.

CMD: spppctl katimer 100

del_ppp unit=0

CMD: spppctl echo_retry 6

PPP Connection (Continuous)...

startPPP: add default dev nas0_0 table 48

CMD: /bin/ip route add default dev nas0_0 table 48

CMD: /bin/iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE

/bin/sh: can't create /proc/br_igmpProxy: nonexistent directory

CMD: /bin/ethctl conntrack killall

ERROR! No such file or directory

<rtusr_rg_api.c 10527 RTK_RG_multicastFlow_flush> /bin/echo 2 > /proc/rg/mcast_protocol

MLD Only.

<rtusr_rg_api.c 10529 RTK_RG_multicastFlow_flush> /bin/echo 0 > /proc/rg/mcast_protBoth IGMP and MLD.

ocol

<utility.c 31215 checkIGMPMLDProxySnooping> isIGMPenable=1, isMLDenable=0, isIGMPProxyEnable=0, isMLDProxyEnable=0

IGMP Only.

<rtusr_rg_api.c 10628 RTK_RG_Ipv6_multicastFlow_flush> /bin/echo 1 > /proc/rg/mcast_protocol

IGMP Only.

<rtusr_rg_api.c 10630 RTK_RG_Ipv6_multicastFlow_flush> /bin/echo 0 > /proc/rg/mcast_protocol

Both IGMP and MLD.

<utility.c 31215 checkIGMPMLDProxySnooping> isIGMPenable=1, isMLDenable=0, isIGMPProxyEnable=0, isMLDProxyEnable=0

omci_wrapper_actpriority: 1, portmask 2047, rx: 803d2c7c

ivateGpon ioctl insert here, priority: 4, portmask 32, rx: 802e1748

failed

IGMP Only.

/bin/sh: can't create /proc/br_mldproxy: nonexistent directory

/bin/sh: can't create /proc/algonoff_ftp: nonexistent directory

/bin/sh: can't create /proc/algonoff_tftp: nonexistent directory

/bin/sh: can't create /proc/algonoff_h323: nonexistent directory

/bin/sh: can't create /proc/algonoff_rtsp: nonexistent directory

/bin/sh: can't create /proc/algonoff_l2tp: nonexistent directory

/bin/sh: can't create /proc/algonoff_ipsec: nonexistent directory

/bin/sh: can't create /proc/algonoff_sip: nonexistent directory

/bin/sh: can't create /proc/algonoff_pptp: nonexistent directory

system(): /bin/echo 1 > /proc/sys/net/ipv4/ip_forward

CMD: /bin/iptables -P INPUT DROP

CMD: /bin/iptables -P FORWARD ACCEPT

CMD: /bin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

CMD: /bin/iptables -A FORWARD -p tcp -o ppp+ --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu

CMD: /bin/iptables -A FORWARD -p tcp -i ppp+ --tcp-flags SYN,RST SYN -m tcpmss --mss 1452:1536 -j TCPMSS --set-mss 1452

CMD: /bin/iptables -A INPUT -p udp --dport 520 -j ACCEPT

CMD: /bin/iptables -A INPUT ! -i br0 -d 239.255.255.250 -j DROP

CMD: /bin/iptables -A INPUT -d 224.0.0.0/4 -j ACCEPT

CMD: /bin/iptables -N cwmp_aclblock

CMD: /bin/iptables -t mangle -N cwmp_aclblock

CMD: /bin/iptables -F cwmp_aclblock

CMD: /bin/iptables -t mangle -F cwmp_aclblock

CMD: /bin/iptables -t mangle -A cwmp_aclblock ! -i br0 -p TCP --dport 9090 -j MARK --set-mark 0x1000

CMD: /bin/iptables -A INPUT -j cwmp_aclblock

CMD: /bin/iptables -t mangle -A PREROUTING -j cwmp_aclblock

CMD: /bin/ebtables -N br_wan

CMD: /bin/ebtables -P br_wan RETURN

CMD: /bin/ebtables -N br_wan_out

CMD: /bin/ebtables -P br_wan_out RETURN

CMD: /bin/ebtables -A INPUT -j br_wan

CMD: /bin/ebtables -A OUTPUT -j br_wan_out

CMD: /bin/iptables -D INPUT ! -i br0 -p UDP --dport 5060 -j ACCEPT

iptables: Bad rule (does a matching rule exist in that chain?).

CMD: /bin/iptables -I INPUT ! -i br0 -p UDP --dport 5060 -j ACCEPT

CMD: /bin/iptables -D INPUT ! -i br0 -p UDP --dport 9000:9003 -j ACCEPT

iptables: Bad rule (does a matching rule exist in that chain?).

CMD: /bin/iptables -I INPUT ! -i br0 -p UDP --dport 9000:9003 -j ACCEPT

CMD: /bin/iptables -D INPUT ! -i br0 -p UDP --dport 9000 -j ACCEPT

iptables: Bad rule (does a matching rule exist in that chain?).

CMD: /bin/iptables -I INPUT ! -i br0 -p UDP --dport 9000 -j ACCEPT

CMD: /bin/iptables -D INPUT ! -i br0 -p UDP --dport 5060 -j ACCEPT

CMD: /bin/iptables -I INPUT ! -i br0 -p UDP --dport 5060 -j ACCEPT

CMD: /bin/iptables -D INPUT ! -i br0 -p UDP --dport 9004:9007 -j ACCEPT

iptables: Bad rule (does a matching rule exist in that chain?).

CMD: /bin/iptables -I INPUT ! -i br0 -p UDP --dport 9004:9007 -j ACCEPT

CMD: /bin/iptables -D INPUT ! -i br0 -p UDP --dport 9004 -j ACCEPT

iptables: Bad rule (does a matching rule exist in that chain?).

CMD: /bin/iptables -I INPUT ! -i br0 -p UDP --dport 9004 -j ACCEPT

CMD: /bin/ebtables -N wlan_block -P RETURN

CMD: /bin/ebtables -A FORWARD -j wlan_block

CMD: /bin/iptables -N domainblk

CMD: /bin/iptables -A domainblk -p udp --dport 53 -m string --domain wpaddomainname --algo bm -j DROP

CMD: /bin/ip6tables -D FORWARD -p udp --dport 53 -m string --domain wpaddomainname --algo bm -j DROP

ip6tables: Bad rule (does a matching rule exist in that chain?).

CMD: /bin/ip6tables -A FORWARD -p udp --dport 53 -m string --domain wpaddomainname --algo bm -j DROP

CMD: /bin/iptables -A INPUT -j domainblk

CMD: /bin/iptables -A FORWARD -j domainblk

CMD: /bin/iptables -A OUTPUT -j domainblk

CMD: /bin/iptables -N tr069

CMD: /bin/iptables -A INPUT -j tr069

CMD: /bin/iptables -F tr069

CMD: /bin/iptables -A tr069 -i br0 -p tcp --dport 9090 -j REJECT --reject-with tcp-reset

CMD: /bin/iptables -A tr069 ! -i ppp0 -p tcp --dport 9090 -j REJECT --reject-with tcp-reset

CMD: /bin/iptables -N inacc

CMD: /bin/iptables -A inacc ! -i br0 -m mark --mark 0x1000 -j ACCEPT

CMD: /bin/iptables -t mangle -I PREROUTING ! -i br0 -p TCP --dport 9090 -j MARK --set-mark 0x1000

CMD: /bin/iptables -I inacc -i br0 -p UDP --dport 69 -j DROP

CMD: /bin/iptables -t mangle -I PREROUTING ! -i br0 -p ICMP --icmp-type echo-request -m limit --limit 1/s -j MARK --set-mark 0x1000

CMD: /bin/iptables -A inacc ! -i br0 -p udp --dport 67 -j ACCEPT

CMD: /bin/iptables -A INPUT -j inacc

CMD: /bin/iptables -N portmapping_dhcp

CMD: /bin/iptables -A INPUT -j portmapping_dhcp

CMD: /bin/ebtables -N portmapping_igmp

CMD: /bin/ebtables -P portmapping_igmp RETURN

CMD: /bin/ebtables -A INPUT -j portmapping_igmp

CMD: /bin/iptables -N dhcp_port_filter

CMD: /bin/iptables -A INPUT -j dhcp_port_filter

CMD: /bin/iptables -A INPUT -i lo -j ACCEPT

CMD: /bin/iptables -N httpsblock

CMD: /bin/iptables -A INPUT -j httpsblock

CMD: /bin/iptables -N urlblock

CMD: /bin/iptables -A FORWARD -j urlblock

CMD: /bin/iptables -N portfw

CMD: /bin/iptables -A FORWARD -j portfw

CMD: /bin/iptables -t nat -N portfw

CMD: /bin/iptables -t nat -A PREROUTING -j portfw

CMD: /bin/iptables -t nat -N portfwPreNatLB

CMD: /bin/iptables -t nat -A PREROUTING -j portfwPreNatLB

CMD: /bin/iptables -t nat -N portfwPostNatLB

CMD: /bin/iptables -t nat -A POSTROUTING -j portfwPostNatLB

CMD: /bin/iptables -F portfw

CMD: /bin/iptables -t nat -F portfw

CMD: /bin/iptables -t nat -F portfwPreNatLB

CMD: /bin/iptables -t nat -F portfwPostNatLB

CMD: /bin/iptables -t nat -A portfw ! -i br0 -m mark --mark 0x1000 -j RETURN

CMD: /bin/iptables -N ipfilter

CMD: /bin/iptables -F ipfilter

CMD: /bin/iptables -A ipfilter ! -i br+ ! -o br+ -j DROP

CMD: /bin/iptables -A ipfilter -m state --state ESTABLISHED,RELATED -j RETURN

CMD: /bin/iptables -A ipfilter -d 224.0.0.0/4 -j RETURN

CMD: /bin/ethctl conntrack killall

CMD: /bin/iptables -A FORWARD -j ipfilter

CMD: /bin/iptables -t nat -N dmzPreNatLB

CMD: /bin/iptables -t nat -A PREROUTING -j dmzPreNatLB

CMD: /bin/iptables -t nat -N dmzPostNatLB

CMD: /bin/iptables -t nat -A POSTROUTING -j dmzPostNatLB

CMD: /bin/iptables -N dmz

CMD: /bin/iptables -t nat -N dmz

CMD: /bin/iptables -F dmz

CMD: /bin/iptables -t nat -F dmz

CMD: /bin/iptables -t nat -F dmzPreNatLB

CMD: /bin/iptables -t nat -F dmzPostNatLB

launch /bin/VoIP_maserati at 20

voip flash client share size = 27387

waiting voip flash server init...)

voip omci line state share size = 744

watch dog pipe mode

VoIP RCM LOG is ENABLED!!

Reset register status...

CMD: /bin/iptables -A ipfilter -j dmz

CMD: /bin/iptables -t nat -A PREROUTING -j dmz

CMD: /bin/iptables -A ipfilter ! -i br+ -j DROP

CMD: /bin/iptables -t nat -N macfilter

CMD: /bin/iptables -t nat -I PREROUTING -j macfilter

CMD: /bin/ebtables -N macfilter

CMD: /bin/ebtables -F macfilter

CMD: /bin/iptables -Turn off.

t nat -F macfilter

/bin/ebtables -P macfilter RETURN

CMD: /bin/ebtables -A FORWARD -j macfilter

CMD: /bin/ebtables -P FORWARD DROP

CMD: /bin/ebtables -N disBCMC

CMD: /bin/ebtables -A disBCMC -d Broadcast -j DROP

CMD: /bin/ebtables -A disBCMC -d Multicast -j DROP

CMD: /bin/ebtables -I FORWARD -j disBCMC

CMD: /bin/ebtables -P disBCMC DROP

CMD: /bin/iptables -A INPUT -m state --state NEW -i br0 -j ACCEPT

CMD: /bin/ip6tables -P INPUT DROP

CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type router-advertisement -j ACCEPT

CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type neighbour-solicitation -j ACCEPT

CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type neighbour-advertisement -j ACCEPT

CMD: /bin/ip6tables -A INPUT -p icmpv6 -i br0 -j ACCEPT

CMD: /bin/ip6tables -A INPUT -m state --state NEW -i br0 -j ACCEPT

CMD: /bin/ip6tables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

CMD: /bin/ip6tables -A INPUT -p udp --dport 546 -j ACCEPT

CMD: /bin/ip6tables -A INPUT ! -i br0 -p udp --dport 547 -j ACCEPT

CMD: /bin/ip6tables -N ipv6filter

CMD: /bin/ip6tables -A FORWARD -j ipv6filter

Restart IPv6 Filter!

CMD: /bin/ip6tables -F ipv6filter

CMD: /bin/ip6tables -D ipv6filter -i br0 -o ppp0 -j DROP

ip6tables: Bad rule (does a matching rule exist in that chain?).

Open file /var/dhcpcV6ppp0.leases fail !

CMD: /bin/ip6tables -A ipv6filter -i br0 -o ppp0 -j DROP

CMD: /bin/ip6tables -A ipv6filter -m state --state ESTABLISHED,RELATED -j RETURN

Update Firewall rule set by user.

Open file /var/prefix_info fail !

CMD: /bin/ethctl conntrack killall

CMD: /bin/ip6tables -A ipv6filter ! -i br0 -j DROP

CMD: /bin/ifconfig eth0.2 up

CMD: /bin/ifconfig eth0.3 up

[sendMessageToLanNetInfo 29703]: get lannetinfo msgqueue error!

CMD: /bin/ifconfig eth0.4 up

[sendMessageToLanNetInfo 29703]: get lannetinfo msgqueue error!

CMD: /bin/ifconfig eth0.5 up

[sendMessageToLanNetInfo 29703]: get lannetinfo msgqueue error!

CMD: /bin/lanNetInfo

[sendMessageToLanNetInfo 29703]: get lannetinfo msgqueue error!

[newDevcieInfoMsgInit 2604]:not find msg.

[newDevcieInfoMsgInit 2622]:init msg queue successfully

[initLanNetInfoData 1359]:init LanNetInfoData.

CMD: /bin/iwpriv wlan0 set_mib mp_specific=0

CMD: /bin/iwpriv wlan0 set_mib regdomain=1

CMD: /bin/iwpriv wlan0 set_mib led_type=12

CMD: /bin/iwpriv wlan0 set_mib ssid=Kidsana_5G

CMD: /bin/iwpriv wlan0-vap0 set_mib ssid=CTC-1111

CMD: /bin/iwpriv wlan0-vap1 set_mib ssid=CTC-2222

CMD: /bin/iwpriv wlan0-vap2 set_mib ssid=CTC-3333

CMD: /bin/iwpriv wlan0-vap3 set_mib ssid=CTC-4444

CMD: /bin/iwpriv wlan0 set_mib opmode=16

CMD: /bin/iwpriv wlan0 set_mib phyBandSelect=2

CMD: /bin/iwpriv wlan0 set_mib tssi_enable=0

CMD: /bin/iwpriv wlan0 set_mib ther=27

CMD: /bin/iwpriv wlan0 set_mib thermal1=27

CMD: /bin/iwpriv wlan0 set_mib thermal2=28

CMD: /bin/iwpriv wlan0 set_mib thermal3=31

CMD: /bin/iwpriv wlan0 set_mib thermal4=26

CMD: /bin/iwpriv wlan0 set_mib xcap=67

CMD: /bin/iwpriv wlan0 set_mib countrycode=1

CMD: /bin/iwpriv wlan0 set_mib countrystr=US

CMD: /bin/iwpriv wlan0 set_mib pwrlevel5GHT40_1S_A=00000000000000000000000000000000000000000000000000000000000000000000002a2a2a2a2a2a2a2a2a2a2a2a2a2b2b2b2b2b2b2b2b2d2d2d2d2d2d2d2d2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f31313131313131313131313131313131313131313131313100000000000000000000000000000000000000

CMD: /bin/iwpriv wlan0 set_mib pwrlevel5GHT40_1S_B=00000000000000000000000000000000000000000000000000000000000000000000002626262626262626262626262626262626262626262626262626262626252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525222222222222222222222222222222222222222222222222222222222222222222222222222222222221212121212121212121212121212121212121212121212100000000000000000000000000000000000000

CMD: /bin/iwpriv wlan0 set_mib pwrlevel_TSSI5GHT40_1S_A=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

CMD: /bin/iwpriv wlan0 set_mib pwrlevel_TSSI5GHT40_1S_B=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

CMD: /bin/iwpriv wlan0 set_mib pwrdiff_5G_20BW1S_OFDM1T_A=0000000000000000000000000000000000000000000000000000000000000000000000cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc00

CMD: /bin/iwpriv wlan0 set_mib pwrdiff_5G_20BW1S_OFDM1T_B=0000000000000000000000000000000000000000000000000000000000000000000000cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc00

CMD: /bin/iwpriv wlan0 set_mib pwrlevel5GHT40_1S_C=00000000000000000000000000000000000000000000000000000000000000000000002d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2e2e2e2e2e2e2e2e2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f2f00000000000000000000000000000000000000

CMD: /bin/iwpriv wlan0 set_mib pwrlevel5GHT40_1S_D=00000000000000000000000000000000000000000000000000000000000000000000002b2b2b2b2b2a2a2a2a2a2a2a2a292929292929292929292929292929292626262626262626262626262626262626262626262626262626262626262626262626262626262626262626262626262525252525252525252525252525252525252525252525252a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a00000000000000000000000000000000000000

CMD: /bin/iwpriv wlan0 set_mib pwrdiff_5G_20BW1S_OFDM1T_C=0000000000000000000000000000000000000000000000000000000000000000000000cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc00

CMD: /bin/iwpriv wlan0 set_mib pwrdiff_5G_20BW1S_OFDM1T_D=0000000000000000000000000000000000000000000000000000000000000000000000cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc00

CMD: /bin/iwpriv wlan0 set_mib bcnint=100

CMD: /bin/iwpriv wlan0 set_mib channel=0

CMD: /bin/iwpriv wlan0 set_mib basicrates=15

CMD: /bin/iwpriv wlan0 set_mib oprates=4095

CMD: /bin/iwpriv wlan0 set_mib autorate=1

CMD: /bin/iwpriv wlan0 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan0-vap0 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan0-vap1 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan0-vap2 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan0 set_mib fragthres=2346

CMD: /bin/iwpriv wlan0-vap0 set_mib fragthres=2346

CMD: /bin/iwpriv wlan0-vap1 set_mib fragthres=2346

CMD: /bin/iwpriv wlan0-vap2 set_mib fragthres=2346

CMD: /bin/iwpriv wlan0 set_mib expired_time=30000

CMD: /bin/iwpriv wlan0 set_mib preamble=0

CMD: /bin/iwpriv wlan0 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan0 set_mib dtimperiod=1

CMD: /bin/iwpriv wlan0 set_mib txbf=1

CMD: /bin/iwpriv wlan0 set_mib txbf_mu=0

CMD: /bin/iwpriv wlan0 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan0 set_mib aclnum=0

CMD: /bin/iwpriv wlan0 set_mib aclmode=0

CMD: /bin/iwpriv wlan0-vap0 set_mib aclnum=0

CMD: /bin/iwpriv wlan0-vap0 set_mib aclmode=0

CMD: /bin/iwpriv wlan0-vap1 set_mib aclnum=0

CMD: /bin/iwpriv wlan0-vap1 set_mib aclmode=0

CMD: /bin/iwpriv wlan0-vap2 set_mib aclnum=0

CMD: /bin/iwpriv wlan0-vap2 set_mib aclmode=0

CMD: /bin/iwpriv wlan0 set_mib wsc_enable=0

CMD: /bin/iwpriv wlan0 set_mib authtype=2

CMD: /bin/iwpriv wlan0-vap0 set_mib authtype=2

CMD: /bin/iwpriv wlan0-vap0 set_mib band=76

CMD: /bin/iwpriv wlan0-vap0 set_mib autorate=1

CMD: /bin/iwpriv wlan0-vap0 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan0-vap0 set_mib qos_enable=1

CMD: /bin/iwpriv wlan0-vap0 set_mib block_relay=0

CMD: /bin/iwpriv wlan0-vap0 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan0-vap0 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan0-vap1 set_mib authtype=2

CMD: /bin/iwpriv wlan0-vap1 set_mib band=76

CMD: /bin/iwpriv wlan0-vap1 set_mib autorate=1

CMD: /bin/iwpriv wlan0-vap1 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan0-vap1 set_mib qos_enable=1

CMD: /bin/iwpriv wlan0-vap1 set_mib block_relay=0

CMD: /bin/iwpriv wlan0-vap1 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan0-vap1 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan0-vap2 set_mib authtype=2

CMD: /bin/iwpriv wlan0-vap2 set_mib band=76

CMD: /bin/iwpriv wlan0-vap2 set_mib autorate=1

CMD: /bin/iwpriv wlan0-vap2 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan0-vap2 set_mib qos_enable=1

CMD: /bin/iwpriv wlan0-vap2 set_mib block_relay=0

CMD: /bin/iwpriv wlan0-vap2 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan0-vap2 set_mib mc2u_disable=0

CMD: /bin/iwpriv▒,0 set_mib authtype=2

▒,0 no private ioctls.

CMD: /bin/iwpriv wlan0-vap3 set_mib band=76

CMD: /bin/iwpriv wlan0-vap3 set_mib autorate=1

CMD: /bin/iwpriv wlan0-vap3 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan0-vap3 set_mib qos_enable=1

CMD: /bin/iwpriv wlan0-vap3 set_mib block_relay=0

CMD: /bin/iwpriv wlan0-vap3 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan0-vap3 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan0 set_mib wpa_cipher=10

CMD: /bin/iwpriv wlan0 set_mib wpa2_cipher=10

CMD: /bin/iwpriv wlan0 set_mib psk_enable=3

CMD: /bin/iwpriv wlan0 set_mib passphrase=jj268186

CMD: /bin/iwpriv wlan0 set_mib gk_rekey=1800

CMD: /bin/iwpriv wlan0 set_mib encmode=2

CMD: /bin/iwpriv wlan0-vap0 set_mib psk_enable=0

CMD: /bin/iwpriv wlan0-vap0 set_mib encmode=0

CMD: /bin/iwpriv wlan0-vap1 set_mib psk_enable=0

CMD: /bin/iwpriv wlan0-vap1 set_mib encmode=0

CMD: /bin/iwpriv wlan0-vap2 set_mib psk_enable=0

CMD: /bin/iwpriv wlan0-vap2 set_mib encmode=0

CMD: /bin/iwpriv wlan0-vap2 set_mib psk_enable=0

CMD: /bin/iwpriv wlan0-vap2 set_mib encmode=0

CMD: /bin/iwpriv wlan0 set_mib 802_1x=1

CMD: /bin/iwpriv wlan0-vap0 set_mib 802_1x=0

CMD: /bin/iwpriv wlan0-vap1 set_mib 802_1x=0

CMD: /bin/iwpriv wlan0-vap2 set_mib 802_1x=0

CMD: /bin/iwpriv wlan0-vap2 set_mib 802_1x=0

CMD: /bin/iwpriv wlan0 set_mib band=76

CMD: /bin/iwpriv wlan0 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan0 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan0-vap0 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan0-vap1 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan0-vap2 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan0 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan0-vap0 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan0-vap1 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan0-vap2 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan0 set_mib cts2self=1

CMD: /bin/iwpriv wlan0 set_mib disable_protection=1

CMD: /bin/iwpriv wlan0-vap0 set_mib disable_protection=1

CMD: /bin/iwpriv wlan0-vap1 set_mib disable_protection=1

CMD: /bin/iwpriv wlan0-vap2 set_mib disable_protection=1

CMD: /bin/iwpriv wlan0 set_mib block_relay=0

CMD: /bin/ebtables -F wlan_block

CMD: /bin/iwpriv wlan0 set_mib qos_enable=1

CMD: /bin/iwpriv wlan0 set_mib apsd_enable=0

CMD: /bin/iwpriv wlan0 set_mib use40M=2

CMD: /bin/iwpriv wlan0-vap0 set_mib use40M=2

CMD: /bin/iwpriv wlan0-vap1 set_mib use40M=2

CMD: /bin/iwpriv wlan0-vap2 set_mib use40M=2

CMD: /bin/iwpriv wlan0 set_mib 2ndchoffset=1

CMD: /bin/iwpriv wlan0-vap0 set_mib 2ndchoffset=1

CMD: /bin/iwpriv wlan0-vap1 set_mib 2ndchoffset=1

CMD: /bin/iwpriv wlan0-vap2 set_mib 2ndchoffset=1

CMD: /bin/iwpriv wlan0 set_mib coexist=0

CMD: /bin/iwpriv wlan0-vap0 set_mib coexist=0

CMD: /bin/iwpriv wlan0-vap1 set_mib coexist=0

CMD: /bin/iwpriv wlan0-vap2 set_mib coexist=0

CMD: /bin/iwpriv wlan0 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan0-vap0 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan0-vap1 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan0-vap2 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan0 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan0-vap0 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan0-vap1 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan0-vap2 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan0 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan0-vap0 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan0-vap1 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan0-vap2 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan0 set_mib ampdu=1

CMD: /bin/iwpriv wlan0-vap0 set_mib ampdu=1

CMD: /bin/iwpriv wlan0-vap1 set_mib ampdu=1

CMD: /bin/iwpriv wlan0-vap2 set_mib ampdu=1

CMD: /bin/iwpriv wlan0 device wlan0 entered promiscuous mode

set_mib amsdu=2

CMD: /bin/iwpriv wlan0-vap0 set_mib amsdu=2

CMD: /bin/iwpriv wlan0-vapchip_version=0x100e,WlanSupportAbility = 0x1

1 set_mib amsdu=2

CMD: /bin/iwpriv wlan0-vap2 set_mib amsdu=2

CMD: /bin/iwpriv wlan0 set_mib vap_enable=0

CMD: /bin/iwpriv wlan0 set_mib disable_DFS=1

CMD: /bin/brctl addif br0 wlan0

CMD: /bin/ifconfig wlan0 up

PrepareRXBD88XX_V1 132

[hard_code_8814b_mibs] +++

MAX_RX_BUF_LEN = 8800

eric-8822 [ODM_software_init][15264]

clock 40MHz

[TRACE]pre_init_system_cfg_88xx_v1 ===>

[TRACE]set_hw_value_88xx_v1 ===>

[TRACE]set_hw_value_88xx_v1 <===

[TRACE]pre_init_system_cfg_88xx_v1 <===

[TRACE]mac_pwr_switch_pcie_8814b ===>

[TRACE]pwr = 1

[TRACE]8821C pwr seq ver = V9

[TRACE]mac_pwr_switch_pcie_8814b <===

InitPON OK!!!

[TRACE]init_system_cfg_88xx_v1 ===>

[TRACE]init_system_cfg_88xx_v1 <===

InitMAC Page0

[GetHwReg88XX][rtl8814BfwMP size]

[GetHwReg88XX][rtl8814BfwMP]

[GetHwReg88XX][rtl8814BfwMP size]

[GetHwReg88XX][rtl8814BfwMP]

[GetHwReg88XX][rtl8814BfwExtMP size]

[GetHwReg88XX][rtl8814BfwExtMP]

D-FW r37580 2019/7/12 15:18 DMA

firmware download success.

>>SetBeaconDownload88XX

Init Download FW OK

[TRACE]cfg_la_mode_88xx_v1 ===>

[TRACE]cfg_la_mode_88xx_v1 <===

[TRACE]init_mac_cfg_88xx_v1 ===>

[TRACE]init_trx_cfg_8814b ===>

[TRACE]ch_map_parser_88xx_v1 done

[TRACE]h2c fs : 1024

[TRACE]init_trx_cfg_8814b <===

[TRACE]init_protocol_cfg_88xx_v1 ===>

[TRACE]init_protocol_cfg_88xx_v1 <===

[TRACE]init_edca_cfg_88xx_v1 ===>

[TRACE]init_edca_cfg_88xx_v1 <===

[TRACE]init_wmac_cfg_88xx_v1 ===>

[TRACE]init_low_pwr_88xx_v1 ===>

[TRACE]init_low_pwr_88xx_v1 <===

[TRACE]init_wmac_cfg_88xx_v1 <===

[TRACE]init_mac_cfg_88xx_v1 <===

halmac_init_mac_cfg OK

halmac_cfg_rx_aggregation OK

[TRACE]cfg_mac_addr_88xx_v1 ===>

[TRACE]cfg_mac_addr_88xx_v1 <===

halmac_init_mac_cfg OK

[TRACE]cfg_drv_info_88xx_v1 ===>

[TRACE]halmac_cfg_drv_info = 1

[TRACE]set_hw_value_88xx_v1 ===>

[TRACE]cfg_rx_ignore_88xx_v1 ===>

[TRACE]cfg_rx_ignore_88xx_v1 <===

[TRACE]set_hw_value_88xx_v1 <===

[TRACE]cfg_drv_info_88xx_v1 <===

[TRACE]set_hw_value_88xx_v1 ===>

[TRACE]set_hw_value_88xx_v1 <===

[GetHwReg88XX][PHY_REG_PG_8814Bmp_Type1] size = 0x89d *((pu4Byte)(val))=0

[GetHwReg88XX][PHY_REG_PG_8814Bmp_Type1 start ] 81c1e810

>>manual_dfs_regdomain:0

SLIC_RING_80V_20HZ

SLIC_RING_80V_20HZ

Reset register status...

start_addr=(0x30000), end_addr=(0x60000), buffer_size=(0x30000), smp_number_max=(24576)

[8814B] Reg0x103C=0x00091f42

start_fw success.

br0: port 6(wlan0) entered forwarding state

br0: port 6(wlan0) entered forwarding state

CMD: /bin/iwpriv wlan1 set_mib mp_specific=0

CMD: /bin/iwpriv wlan1 set_mib regdomain=1

CMD: /bin/iwpriv wlan1 set_mib led_type=12

CMD: /bin/iwpriv wlan1 set_mib acs_type=4

CMD: /bin/iwpriv wlan1 set_mib autoch_timeout=300

CMD: /bin/iwpriv wlan1 set_mib ssid=kIdsana_2G

CMD: /bin/iwpriv wlan1-vap0 set_mib ssid=AP-1

CMD: /bin/iwpriv wlan1-vap1 set_mib ssid=AP-2

CMD: /bin/iwpriv wlan1-vap2 set_mib ssid=AP-3

CMD: /bin/iwpriv wlan1-vap3 set_mib ssid=AP-4

CMD: /bin/iwpriv wlan1 set_mib opmode=16

CMD: /bin/iwpriv wlan1 set_mib phyBandSelect=1

CMD: /bin/iwpriv wlan1 set_mib pwrlevelCCK_A=2323232626262626262727272727

CMD: /bin/iwpriv wlan1 set_mib pwrlevelCCK_B=2727272727272727272727272727

CMD: /bin/iwpriv wlan1 set_mib pwrlevelHT40_1S_A=2727272727272727272929292929

CMD: /bin/iwpriv wlan1 set_mib pwrlevelHT40_1S_B=2929292929292929292929292929

CMD: /bin/iwpriv wlan1 set_mib pwrdiffHT40_2S=0000000000000000000000000000

CMD: /bin/iwpriv wlan1 set_mib pwrdiffHT20=0000000000000000000000000000

CMD: /bin/iwpriv wlan1 set_mib pwrdiffOFDM=2222222222222222222222222222

CMD: /bin/iwpriv wlan1 set_mib tssi_enable=0

CMD: /bin/iwpriv wlan1 set_mib ther=33

CMD: /bin/iwpriv wlan1 set_mib thermal1=33

CMD: /bin/iwpriv wlan1 set_mib xcap=40

CMD: /bin/iwpriv wlan1 set_mib countrycode=1

CMD: /bin/iwpriv wlan1 set_mib countrystr=US

CMD: /bin/iwpriv wlan1 set_mib bDPPathAOK=0

CMD: /bin/iwpriv wlan1 set_mib bDPPathBOK=0

CMD: /bin/iwpriv wlan1 set_mib bcnint=100

CMD: /bin/iwpriv wlan1 set_mib channel=0

CMD: /bin/iwpriv wlan1 set_mib basicrates=15

CMD: /bin/iwpriv wlan1 set_mib oprates=4095

CMD: /bin/iwpriv wlan1 set_mib autorate=1

CMD: /bin/iwpriv wlan1 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan1-vap0 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan1-vap1 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan1-vap2 set_mib rtsthres=2347

CMD: /bin/iwpriv wlan1 set_mib fragthres=2346

CMD: /bin/iwpriv wlan1-vap0 set_mib fragthres=2346

CMD: /bin/iwpriv wlan1-vap1 set_mib fragthres=2346

CMD: /bin/iwpriv wlan1-vap2 set_mib fragthres=2346

CMD: /bin/iwpriv wlan1 set_mib expired_time=30000

CMD: /bin/iwpriv wlan1 set_mib preamble=0

CMD: /bin/iwpriv wlan1 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan1 set_mib dtimperiod=1

CMD: /bin/iwpriv wlan1 set_mib txbf=1

CMD: /bin/iwpriv wlan1 set_mib txbf_mu=0

CMD: /bin/iwpriv wlan1 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan1 set_mib aclnum=0

CMD: /bin/iwpriv wlan1 set_mib aclmode=0

CMD: /bin/iwpriv wlan1-vap0 set_mib aclnum=0

CMD: /bin/iwpriv wlan1-vap0 set_mib aclmode=0

CMD: /bin/iwpriv wlan1-vap1 set_mib aclnum=0

CMD: /bin/iwpriv wlan1-vap1 set_mib aclmode=0

CMD: /bin/iwpriv wlan1-vap2 set_mib aclnum=0

CMD: /bin/iwpriv wlan1-vap2 set_mib aclmode=0

CMD: /bin/iwpriv wlan1 set_mib wsc_enable=0

CMD: /bin/iwpriv wlan1 set_mib authtype=2

CMD: /bin/iwpriv wlan1-vap0 set_mib authtype=2

CMD: /bin/iwpriv wlan1-vap0 set_mib band=11

CMD: /bin/iwpriv wlan1-vap0 set_mib autorate=1

CMD: /bin/iwpriv wlan1-vap0 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan1-vap0 set_mib qos_enable=1

CMD: /bin/iwpriv wlan1-vap0 set_mib block_relay=0

CMD: /bin/iwpriv wlan1-vap0 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan1-vap0 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan1-vap1 set_mib authtype=2

CMD: /bin/iwpriv wlan1-vap1 set_mib band=11

CMD: /bin/iwpriv wlan1-vap1 set_mib autorate=1

CMD: /bin/iwpriv wlan1-vap1 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan1-vap1 set_mib qos_enable=1

CMD: /bin/iwpriv wlan1-vap1 set_mib block_relay=0

CMD: /bin/iwpriv wlan1-vap1 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan1-vap1 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan1-vap2 set_mib authtype=2

CMD: /bin/iwpriv wlan1-vap2 set_mib band=11

CMD: /bin/iwpriv wlan1-vap2 set_mib autorate=1

CMD: /bin/iwpriv wlan1-vap2 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan1-vap2 set_mib qos_enable=1

CMD: /bin/iwpriv wlan1-vap2 set_mib block_relay=0

CMD: /bin/iwpriv wlan1-vap2 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan1-vap2 set_mib mc2u_disable=0

CMD: /bin/iwpriv▒,0 set_mib authtype=2

▒,0 no private ioctls.

CMD: /bin/iwpriv wlan1-vap3 set_mib band=11

CMD: /bin/iwpriv wlan1-vap3 set_mib autorate=1

CMD: /bin/iwpriv wlan1-vap3 set_mib hiddenAP=0

CMD: /bin/iwpriv wlan1-vap3 set_mib qos_enable=1

CMD: /bin/iwpriv wlan1-vap3 set_mib block_relay=0

CMD: /bin/iwpriv wlan1-vap3 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan1-vap3 set_mib mc2u_disable=0

CMD: /bin/iwpriv wlan1 set_mib wpa_cipher=10

CMD: /bin/iwpriv wlan1 set_mib wpa2_cipher=10

CMD: /bin/iwpriv wlan1 set_mib psk_enable=3

CMD: /bin/iwpriv wlan1 set_mib passphrase=jj268186

CMD: /bin/iwpriv wlan1 set_mib gk_rekey=1800

CMD: /bin/iwpriv wlan1 set_mib encmode=2

CMD: /bin/iwpriv wlan1-vap0 set_mib psk_enable=0

CMD: /bin/iwpriv wlan1-vap0 set_mib encmode=0

CMD: /bin/iwpriv wlan1-vap1 set_mib psk_enable=0

CMD: /bin/iwpriv wlan1-vap1 set_mib encmode=0

CMD: /bin/iwpriv wlan1-vap2 set_mib psk_enable=0

CMD: /bin/iwpriv wlan1-vap2 set_mib encmode=0

CMD: /bin/iwpriv wlan1-vap2 set_mib psk_enable=0

CMD: /bin/iwpriv wlan1-vap2 set_mib encmode=0

CMD: /bin/iwpriv wlan1 set_mib 802_1x=1

CMD: /bin/iwpriv wlan1-vap0 set_mib 802_1x=0

CMD: /bin/iwpriv wlan1-vap1 set_mib 802_1x=0

CMD: /bin/iwpriv wlan1-vap2 set_mib 802_1x=0

CMD: /bin/iwpriv wlan1-vap2 set_mib 802_1x=0

CMD: /bin/iwpriv wlan1 set_mib band=11

CMD: /bin/iwpriv wlan1 set_mib deny_legacy=0

CMD: /bin/iwpriv wlan1 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan1-vap0 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan1-vap1 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan1-vap2 set_mib lgyEncRstrct=15

CMD: /bin/iwpriv wlan1 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan1-vap0 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan1-vap1 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan1-vap2 set_mib wifi_specific=2

CMD: /bin/iwpriv wlan1 set_mib cts2self=1

CMD: /bin/iwpriv wlan1 set_mib disable_protection=1

CMD: /bin/iwpriv wlan1-vap0 set_mib disable_protection=1

CMD: /bin/iwpriv wlan1-vap1 set_mib disable_protection=1

CMD: /bin/iwpriv wlan1-vap2 set_mib disable_protection=1

CMD: /bin/iwpriv wlan1 set_mib block_relay=0

CMD: /bin/ebtables -F wlan_block

CMD: /bin/iwpriv wlan1 set_mib qos_enable=1

CMD: /bin/iwpriv wlan1 set_mib apsd_enable=0

CMD: /bin/iwpriv wlan1 set_mib use40M=0

CMD: /bin/iwpriv wlan1-vap0 set_mib use40M=0

CMD: /bin/iwpriv wlan1-vap1 set_mib use40M=0

CMD: /bin/iwpriv wlan1-vap2 set_mib use40M=0

CMD: /bin/iwpriv wlan1 set_mib 2ndchoffset=0

CMD: /bin/iwpriv wlan1-vap0 set_mib 2ndchoffset=0

CMD: /bin/iwpriv wlan1-vap1 set_mib 2ndchoffset=0

CMD: /bin/iwpriv wlan1-vap2 set_mib 2ndchoffset=0

CMD: /bin/iwpriv wlan1 set_mib coexist=0

CMD: /bin/iwpriv wlan1-vap0 set_mib coexist=0

CMD: /bin/iwpriv wlan1-vap1 set_mib coexist=0

CMD: /bin/iwpriv wlan1-vap2 set_mib coexist=0

CMD: /bin/iwpriv wlan1 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan1-vap0 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan1-vap1 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan1-vap2 set_mib shortGI20M=1

CMD: /bin/iwpriv wlan1 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan1-vap0 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan1-vap1 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan1-vap2 set_mib shortGI40M=1

CMD: /bin/iwpriv wlan1 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan1-vap0 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan1-vap1 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan1-vap2 set_mib shortGI80M=1

CMD: /bin/iwpriv wlan1 set_mib adevice wlan1 entered promiscuous mode

mpdu=1

CMD: /bin/iwpriv wlan1-vap0 set_mib ampdu=1

CMD: /bin/iwpriv wlan1-vap1 set_mib ampdu=1

CMchip_version=0x100c,WlanSupportAbility = 0x3

D: /bin/iwpriv wlan1-vap2 set_mib ampdu=1

CMD: /bin/iwpriv wlan1 set_mib amsdu=0

CMD: /bin/iwpriv wlan1-vap0 set_mib amsdu=0

CMD: /bin/iwpriv wlan1-vap1 set_mib amsdu=0

CMD: /bin/iwpriv wlan1-vap2 set_mib amsdu=0

CMD: /bin/iwpriv wlan1 set_mib vap_enable=0

CMD: /bin/brctl addif br0 wlan1

CMD: /bin/ifconfig wlan1 up

eric-8822 [ODM_software_init][15264]

clock 25MHz

br0: port 6(wlan0) entered forwarding state

start_addr=(0x2000), end_addr=(0x10000), buffer_size=(0xe000), smp_number_max=(7168)

br0: port 7(wlan1) entered forwarding state

br0: port 7(wlan1) entered forwarding state

START WPS SETUP!

CMD: /bin/mkdir -p /var/wps/

CMD: /bin/cp /etc/simplecfgservice.xml /var/wps/

CMD ARGS: -start -both_band_ap -w wlan0 -c /var/wscd.conf -fi /var/wscd-wlan0.fifo -fi2 /var/wscd-wlan1.fifo

Writing file /var/wscd.conf...

WiFi Simple Config v1.24.3 (2019.09.06-08:54+0000).

Total WPA/WPA2 number is 2

iwcontrol RegisterPID to (wlan0)

iwcontrol RegisterPID to (wlan1)

CMD: /bin/iptables -F tr069

CMD: /bin/iptables -A tr069 -i br0 -p tcp --dport 9090 -j REJECT --reject-with tcp-reset

CMD: /bin/iptables -A tr069 ! -i ppp0 -p tcp --dport 9090 -j REJECT --reject-with tcp-reset

CMD: /bin/cwmpClient

CMD: /var/tmp/pmap_deconfig

exec /var/tmp/pmap_deconfig failed

CMD: /bin/ebtables -D FORWARD -j vlanmapping

Illegal target name 'vlanmapping'.

CMD: /bin/ebtables -N vlanmapping

CMD: /bin/ebtables -P vlanmapping DROP

CMD: /bin/ebtables -F vlanmapping

CMD: /bin/ebtables -A FORWARD -j vlanmapping

CMD: /bin/ebtables -t broute -D BROUTING -j broute_vlanmapping

Illegal target name 'broute_vlanmapping'.

CMD: /bin/ebtables -t broute -N broute_vlanmapping

CMD: /bin/ebtables -t broute -D BROUTING -j vlanbinding

Illegal target name 'vlanbinding'.

CMD: /bin/ebtables -t broute -N vlanbinding

CMD: /bin/ebtables -t broute -P vlanbinding RETURN

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -I BROUTING -j vlanbinding

CMD: /bin/ebtables -t broute -P broute_vlanmapping RETURN

CMD: /bin/ebtables -t broute -F broute_vlanmapping

CMD: /bin/ebtables -t broute -I BROUTING -j broute_vlanmapping

CMD: /bin/ebtables -t broute -N broute_chain_eth0.2 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_eth0.2

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_eth0.3 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_eth0.3

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_eth0.4 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_eth0.4

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_eth0.5 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_eth0.5

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_wlan0 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_wlan0

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_wlan0-vap0 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_wlan0-vap0

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_wlan0-vap1 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_wlan0-vap1

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_wlan0-vap2 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_wlan0-vap2

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/ebtables -t broute -N broute_chain_wlan0-vap3 -P RETURN

CMD: /bin/ebtables -t broute -F broute_chain_wlan0-vap3

CMD: /bin/ebtables -t broute -F vlanbinding

CMD: /bin/iptables -t mangle -D PREROUTING -i br0 -j lan_mark

iptables v1.4.18: Couldn't find target `lan_mark'

Try `iptables -h' or 'iptables --help' for more information.

CMD: /bin/iptables -t mangle -N lan_mark

CMD: /bin/iptables -t mangle -F lan_mark

CMD: /bin/iptables -t mangle -A PREROUTING -i br0 -j lan_mark

CMD: /bin/ip6tables -t mangle -D PREROUTING -i br0 -j lan_mark

ip6tables v1.4.18: Couldn't find target `lan_mark'

Try `ip6tables -h' or 'ip6tables --help' for more information.

CMD: /bin/ip6tables -t mangle -N lan_mark

CMD: /bin/ip6tables -t mangle -F lan_mark

CMD: /bin/ip6tables -t mangle -A PREROUTING -i br0 -j lan_mark

CMD: /bin/ebtables -F portmapping_igmp

CMD: /bin/ebtables -D FORWARD -j portmapping

Illegal target name 'portmapping'.

CMD: /bin/ebtables -X portmapping

Chain 'portmapping' doesn't exist.

CMD: /bin/ebtables -N portmapping

CMD: /bin/ebtables -A FORWARD -j portmapping

CMD: /bin/ip rule del fwmark 0x00008000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00008000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00010000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00010000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00018000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00018000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00020000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00020000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00028000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00028000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00030000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00030000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00038000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00038000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00040000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00040000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00048000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00048000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00050000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00050000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00058000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00058000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00060000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00060000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00068000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00068000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del fwmark 0x00070000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del fwmark 0x00070000/0x000f8080

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

cwmp_flag=30

<main.c>Set No Debug Message!

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del probr0: port 7(wlan1) entered forwarding state

hibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/ip -6 rule del prohibit

RTNETLINK answers: No such file or directory

CMD: /bin/iptables -F portmapping_dhcp

CMD: /bin/ip rule add iif br0 table 252 pref 32765

CMD: /bin/ip -6 rule add iif br0 table 252 pref 32765

CMD: /bin/ebtables -I vlanmapping -i eth0.2 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i eth0.3 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i eth0.4 -j RETURN

<cwmp_utility.c>Set No Debug Message[1]

<main.c>Set Delay!

<cwmp_utility.c>Set Delay[0]

<cwmp_utility.c>Set gPrintSoap[0]

<cwmp_utility.c>Set gRandomInform[0]

<cwmp_solarInit:24>INFO: Prepare to init maserati listener.

<

enter cwmp_main!

cwmp_solarListener:Root is InternetGatewayDevice.

46>INFO: Start maserati event listener thread.

Start cwmp_main() !

========== CWMP library ==========

Trunk: ^/branches/3.3/user/cwmp-tr069

Revision: 30979

Build time: 20190214_16:43:12

==================================

CMD: /bin/ebtables -I vlanmapping -i eth0.5 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan0 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan0-vap0 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan0-vap1 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan0-vap2 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan0-vap3 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan1 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan1-vap0 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan1-vap1 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan1-vap2 -j RETURN

CMD: /bin/ebtables -I vlanmapping -i wlan1-vap3 -j RETURN

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in eth0.2 -j MARK --set-mark 0x00008000/0x000f8080

CMD: /bin/ip6tables -t mangle -A lan_mark -i eth0.2 -j MARK --set-mark 0x00008000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in eth0.3 -j MARK --set-mark 0x00010000/0x000f8080

CMD: /bin/ip6tables -t mangle -A lan_mark -i eth0.3 -j MARK --set-mark 0x00010000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in eth0.4 -j MARK --set-mark 0x00018000/0x000f8080

CMMLD Only.

D: /bin/ip6tables -t mangle -A lan_mark -i eth0.4 -j MARK --set-mark 0x00018000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in eth0.5 -j MARK --set-mark 0x00020000/0x000f8080

CMD: /bin/ip6tables -t mangle -A lan_mark -i eth0.5 -j MARK --set-mark 0x00020000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan0 -j MARK --set-mark 0x00028000/0x0Both IGMP and MLD.

00f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan0-vap0 -j MARK --set-mark 0x00030000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan0-vap1 -j MARK --set-mark 0x00038000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan0-vap2 -j MARK --set-mark 0x00040000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mIGMP Only.

ark -m physdev --physdev-in wlan1 -j MARK --set-mark 0x00050000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan1-vap0 -j MARK --set-mark 0x00058000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan1-vap1 -j MARK --set-mark 0x00060000/0x000f8080

CMD: /bin/iptables -t mangle -A lan_mark -m physdev --physdev-in wlan1-vap2 -j MARK --set-mark 0x00068000/0x000f8080

<subr_pmap.c 562 set_ip6_policyrt> [IPv6] the itfGroup is 0x0. ifIndex is 0x10000. ifname is ppp0

CMBoth IGMP and MLD.

D: /bin/ip -6 route add default dev nas0_0 table 48

CMD: /bin/ip -6 route add default dev nas0_0 table 252

CMD: /bin/udhcpd -S /var/udhcpd/udhcpd.conf

handleIGMPandMLD: isIGMPenable:1, isMLDenable:0

<rtusr_rg_api.c 10527 RTK_RG_multicastFlow_flush> /bin/echo 2 > /proc/rg/mcast_protocol

Start udhcpd server!

udhcp server/relay (v0.9.8) started

Run Server function only

dhcpd server read configfile:poolname=default

<rtusr_rg_api.c 10529 RTK_RG_multicastFlow_flush> /bin/echo 0 > /proc/rg/mcast_protocol

<rtusr_rg_api.c 10628 RTK_RG_Ipv6_multicastFlow_flush> /bin/echo 1 > /proc/rg/mcast_protocol

<rtusr_rg_api.c 10630 RTK_RG_Ipv6_multicastFlow_flush> /bin/echo 0 > /proc/rg/mcast_protocol

<utility.c 31215 checkIGMPMLDProxySnooping> isIGMPenablIGMP Only.

e=1, isMLDenable=0, isIGMPProxyEnable=0, isMLDProxyEnable=0

IGMP Snooping: enabled

handleIGMPandMLD: isIGMPenable:1, isMLDenable:0

LD Only.

46m<rtusr_rg_api.c 10527 RTK_RG_multicastFlow_flush> /bin/echo 2 > /proc/rg/mcast_protocol

<rtusr_rg_api.c 10529 RTK_RG_multicastFlow_flush> /Both IGMP and MLD.

bin/echo 0 > /proc/rg/mcast_protocol

<rtusr_rg_api.c 10628 RTK_RG_Ipv6_multicastFlow_flush>IGMP Only.

/bin/echo 1 > /proc/rg/mcast_protocol

<rtusr_rg_api.c 10630 RTK_RG_Ipv6_multicastFlow_flush>Both IGMP and MLD.

/bin/echo 0 > /proc/rg/mcast_protocol

<utility.c 31215 checkIGMPMLDProxySnooping> isIGMPenable=1, isMLDenable=0, isIGMPProxyEnable=0, isMLDProxyEnable=0

IGMP Only.

MLD Snooping: disabled

subr_qos_3.c: setupIPQ 2682

subr_qos_3.c: setupDefaultQdisc 2565

CMD: tc qdisc add dev nas0_0 root handle 1: prio

RTNETLINK answers: No such filset dos:0x0

e or directory

rg DoS: disable

IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready

IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready

IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready

IPv6: ADDRCONF(NETDEV_UP): eth0.5: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp1: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp2: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp3: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp4: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp5: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp6: link is not ready

IPv6: ADDRCONF(NETDEV_UP): ppp7: link is not ready

IPv6: ADDRCONF(NETDEV_UP): nas0_0: link is not ready

ERROR! No such file or directory

vsntp: Kicked to wake-up by SIGUSR1

sh: can't open '/etc/scripts/rps.sh'

port set phy-force-power-down port all state disable

RTK.0> command:[set_lanhost_block_from_wan 29891]: successfully.

restore catv led

unable to parse 'opt ntpsrv time.windows.com'

unable to parse 'opt tzstring '

Listening on Socket/br0

Sending on Socket/br0

Password:

login: root

Password:

login: admin

Password:

login: admin

Password:

login:

ผมไม่รู้ User/Password ครับ